These warm and wooly mitts are knit from the bottom up, beginning with a cable rib and ending with an i-cord bind-off. The patterning is Fair Isle, meaning two colors are used on each round. If this is a technique you’ve never tried before, these mitts could be a good place to start. It’s always less daunting trying out new skills on a small project. Deluxe DK Superwash is the featured yarn in this project, making this pair a great gift since they are machine washable.
To celebrate the 12 Days of Winter and my love of snowflakes, I’ve written a poem.
The Snowflake Sonnet
Each year the wind turns cold and gray. For some this is a hindrance. But for those who knit and crochet This weather is far from nuisance.
In May through the fall when it’s warm, I turn to linen, cotton, and bamboo. But plant fibers aren’t fit for snowstorm As I trudge to work on showshoe.
It is springy wool that I long for Throughout most months of the year. Its fabric warms me to the core; The feel of its stitches brings me such cheer.
For this year’s winter I believe I will make Knitted mitts adorned with a snowflake.
The pattern is written for the smaller size as shown, and also a large size, long enough to wrap around your neck twice. The yarn included in the kit is enough to knit either two small cowls, or one large. So – bonus!
The main body of the cowl is super-duper simple. The complex looking color pattern is just slipped stitches. Colors are changed every two rounds, and only one color is used per round. It hits that sweet spot of knitting where the pattern is just a bit more than stockinette – enough to keep you interested – but easy enough that you can work on it anywhere.
My favorite detail of this cowl is the picot edging along both edges. This could have been done with a knitted picot bind-off, but I chose to use a crochet picot instead. For me, it’s just less fiddly than doing its knit counterpart. Let’s learn how to do it!
If you need a little closer view on any of the following images, just click on it and it will open in a new browser window.
In my swatch, you can see that I’ve already done the picot edging along the lower edge. I’m going to be using a contrast color for the top edge so it’s easier for you to see.Begin by pulling up a loop onto your hook. Be sure to work through both loops of the knit stitch from the cowl as you do this.Step 1: Chain 3. To make a chain, first yarn over as shown.To complete the chain, pull the yarn over through the loop already on your hook.All 3 chains complete.Step 2: Slip stitch into the same knit stitch from the cowl body. To do this, first insert your hook into the stitch, going underneath the same two loops again.Yarn over and pull through the knit stitch.Then pull this second loop through the first loop on the hook to complete the slip stitch.Step 3: Skip the next knit stitch from the cowl body, and slip stitch into the next knit stitch.
Repeat Steps 1-3 for the edging. So you’re going to be working [slip stitch, chain 3, slip stitch] into every other stitch along both edges of the cowl. No big deal, right?
Here’s my swatch after a few more little picots.
Again, you can find the kit for this cowl on our website here (link). Here’s to learning new things!
The Pine View scarf is a perfect winter accessory. It’s large, warm, and has an excellent amount of squish because it’s knit in our Deluxe Chunky.
This pattern only uses charts, but don’t let that intimidate you! The stitches are not at all complicated. You’ll get a nice rest at the center of the scarf, too. Personally, I prefer charts over written instructions because I’m a visual person. Charts enable you to see the stitches before you create them.
With that said, some charts can seem overwhelming. You might feel as though you’re getting lost in the grid full of symbols. Fear not, because I’d like to share some helpful tips and tricks for reading charts.
1. Familiarize yourself with symbols.
Take time to review the key and ensure you understand what each symbol means.
2. Flat or in the round?
Is the pattern flat or in the round? When you knit in the round, charts are read from right to left on every row. Pine View is knit flat, meaning that on right side rows you’ll read right to left, and on wrong side rows you’ll read left to right.
Charts that are knit flat have numbers on both the right and left sides. Charts knit in the round only have numbers on the right side.
3. Stay on track!
Highlighters – Don’t cross out rows—you want to be able to go back and read previous rows in case you make a mistake. And, if you’re like me, you will make mistakes! I probably use highlighters most frequently. Simply highlight the rows you’ve completed, and read from the row above.
Washi Tape – For those who prefer not to see previous rows at all, washi tape is a great solution. It can easily be removed from the paper, so you can hide previous rows and simply peel back the tape to see them.
Stitch markers – For charts that have repeats, use stitch markers. It honestly makes a world of difference. A mistake is less likely to offset the entire row if you’re using stitch markers between each repeat.
You can find this pattern, Day 6 of our 12 Days of Winter collection here.
Today we’re introducing the Nutmeg Hat and Mitten Set. The neutral set is incredibly wearable for men and women alike. Personally, I love working with undyed wool. It is rustic in appearance and goes with nearly anything. While I’m a lover of color, I equally adore the natural shades of wool. You can see more of our Deluxe Worsted Naturals collection here.
This set features all over cables and a contrasting cuff. I wanted to give this set a professional finish, so I used the long-tail tubular cast-on method.
I can easily recall a time when I felt intimidated by the Tubular cast-on method. Like many things in knitting (and in life), we often perceive new things to be more challenging than they really are. This cast-on method is one of those things. If you look at the Nutmeg set, you’ll notice that the 1×1 Ribbing seems to run seamlessly from the right side to the wrong side. Notice the lack of a cast-on edge in the photo below. You can’t tell where it was cast-on. That is the beauty of a tubular cast-on.
It takes more time than most other methods and it feels a bit fiddly at first, but it’s well worth it. It’s by far my favorite method when I’m using 1×1 Rib.
If you’d like a closer look at each photo, simply click it.
To begin, place your yarn over the needle, leave a long tail as you would with a traditional long-tail cast on. You can use a slip knot, however; I do not so that the cast-on stitches are as invisible as possible.Hold your yarn in place with your index finger. Separate your tail and working yarn with your thumb and your index finger. You’ll do the same way you would for a regular long-tail cast-on.Notice that I’m tensioning my yarn the same way that I would for a regular long-tail cast on.Working from front to back, bring your needle under the yarn around your thumb.Bring the needle up through the center.Working from front to back, bring the needle over the yarn around your index finger and dip underneath it, then underneath the yarn around your thumb.Correct the tension in your yarn. You now have two stitches. Notice how there is not a bump across that stitch? This will be a knit stitch.
The motion for a purl stitch mirrors the knit stitch.
Working from front to back, bring the needle over the yarn around your index finger, dipping below it and bringing the needle back through the center.Working from back to front, bring the needle over the yarn around your thumb, dipping below it and then below the yarn around your index finger.Correct your tension. Notice that this stitch has a purl bump. This is a purl stitch.
Continue in this manner, alternating between knit and purl stitches until you have the required number of stitches.
Notice the difference between the knit stitches and the purl stitches.
Once you have the correct number of stitches, carefully turn your work. I highly recommend using your index finger to hold the last stitch you cast on in place. Now you’ll begin working the first foundation row.
Once you’ve turned your work, grab your working yarn and slip the first stitch purlwise with your yarn in front.Bring your yarn to the back.Knit the next stitch through the back loop. This will untwist the knit stitch.
Continue to slip the purl stitches with your yarn in front and knit the knit stitches through the back loop to the end of your work. Turn your work. Now you’ll begin the second foundation row.
Just as in the previous row, slip the purl stitches purlwise with yarn in front.Knit the knit stitches normally–there is no need to knit them through the back loop because these stitches should no longer be twisted.
Repeat the last two steps to the end of the row
On the next row, simply work in K1, P1 ribbing by purling the purl stitches and knitting the knit stitches.
This is what your finished cast on should look like.
Once you’ve finished casting on, you can join your work in the round (as would be the case for the Nutmeg Hat and Mitten Set). There will be a small space you’ll want to seam. Typically I do this just before weaving my tail into the project.
This method works for projects that are knit flat or in the round. It gives your projects such a neat finish. It’s also much more stretchy than a traditional long tail cast-on.
You can find the link to the Nutmeg Hat and Mitten set here.
Though there are some traditional 2×2 cable panels in both hat and scarf, most of the crossed stitches are actually twisted stitches. Right and left twist stitches are a way of crossing stitches that doesn’t require a cable needle. And with just a bit of confidence, 2×2 cables can be crossed without a needle, as well.
I love love love twisted stitches and use them frequently in designs. Through the magic of (simple) needle acrobatics, a lovely texture can be made across your knit fabric. These types of stitches were used a few years ago in our Uptown Afghan Knitalong. Here is the video showing how to do right and left twists.
Remember, each of our 12 Days of Winter projects come packaged in a very giftable bag tied with ribbon. So if you’re shopping for one of your knitting buddies, these might just fit the bill.
I have no plans of taking this off any time soon. It’s freezing in our office!
Let me set the scene for you: It’s snowing outside. You’re curled up on a sectional sofa with freshly made hot-cocoa (with a nip…and marshmallows), the sun just set, and your favorite furry friend has his head on your lap. You have no worries, no place to be, you’re on vacation, and you can sleep as late as you like tomorrow morning. The fire is crackling, but it’s still a bit drafty. Cool enough that knitwear is very much required. You’re just about to turn on the first episode of a TV series you are quite sure will be binge-watched. You have just cast on for your next sweater project that you’re fantasizing about wearing this year still. And last but not least, you’re already wearing your Cozy House Socks that were started just yesterday because they go crazy quick!
Sound like a dream? Well, at least one part of that fantasy can be very real. Knit in Deluxe Chunky Naturals, these socks are a truly quick project. I know, because I personally knit the sample over part of a day! Each sock pictured took about 60g of a 100g skein, leaving plenty of room for giant man feet or to make the leg a bit longer.
These socks are knit from the top down with a gusset and short-row heel. The cable pattern is both written and charted. You can find this the pattern for this kit, Series 1 Day 3 of our 12 Days of Winter collection here (link).
Day 2 of Winter brings us the Broken Garter Scarf. The stitch pattern in this scarf will look familiar to anyone who owns or has read a copy of the brilliant Sequence Knitting book by Cecelia Campochiaro. If you don’t own this book yet, run out and buy it!
This book explores the concept of simple knit-purl texture in a variety of thought-provoking ways. There are many chapters in the book, each expounding on previous ideas. It is fascinating! And it’s easy to read through, fall in love with an idea, and just cast on.
The idea of this particular stitch pattern is a concept in the book that is presented in a variety of ways. I cast on several times with different combinations of knit and purl columns until I finally settled on one that felt right. It’s dead simple – it’s a one row repeat!
That is how the Broken Garter Scarf was born. I wanted to create a project easy to knit that was giftable for women and men alike. Just two balls of Deluxe Worsted Superwash and a few evenings of mindless knitting, and this scarf can be yours.
You can find this pattern, from Series 1, Day 2 of our 12 Days of Winter collection here (link).
Over the next 12 days, we’re releasing a series of kits designed by the Universal Yarn Design Team. It’s a cozy, wintry collection of accessories that make perfect gifts–for yourself and your loved ones. To accompany the kits, we’d like to share a blog post each day. This series will highlight special aspects of each pattern and include inspiration, tips, tricks, and a few tutorials. For Day 1, we’re introducing the Blue Spruce Socks in Deluxe DK Tweed Superwash.
For as long as I can remember, I’ve loved evergreens and conifers. I’m not sure if it’s because of their fragrant needles and bark, or if it’s because their beautiful colors brought me joy during long and endlessly grey winters. Whatever the reason—I’ve always been drawn to them, so it’s no surprise that I designed the Blue Spruce Socks for our 12 Days of Winter collection.
These socks are warm, cozy, and a joy to knit. If you aren’t a fan of stranded colorwork, don’t fret! The Blue Spruce motif is achieved through slipped stitches. One color is carried at a time and only the stitches requiring the working yarn are knit—the rest are simply slipped purlwise. It requires twice as many rows, but the overall effect is very similar to the appearance of stranded knitting.
In addition to colorwork, the small details make this project ever so special. It features a 1×1 Twisted Rib cuff and an Eye of Partridge heel. My favorite detail is the slip-stitch stripe just before the contrasting-color toes.
You can find this kit, Day 1 of our 12 Days of Winter collection here.
